Crown Pool Superstore

Description

The Blue Connect Calibration kit contains all you’ll need to effectively recalibrate your Blue Connect smart pool analyser.

This kit contains:

• 1 x 20mL pH7 solution
• 1 x 20mL pH4 solution
• 1 x 20mL 470mV ORP solution

How to calibrate the Blue Connect?

1. Take out the device from the water, pull out the usage cap and rinse the probe in clear water.
2. Rinse the storage cap with clear water and wipe it.
3. Activate the Internet (Wi-Fi or 4G) and Bluetooth® on your smartphone.
   NOTE: Stay close to your device throughout the whole calibration process.
4. In the app, in “Settings“ » “Blue Connect“, press “Calibrate“. A message at the top of the screen indicates that the device is detected.
5. Place a pH4 solution in the storage cap and screw it to the device. Then, press “Validate”. At the top of the screen, you will see the progression of the measurement. Once the pH4 measurement is complete, unscrew the storage cap and rinse the probe. Empty, rinse5 and wipe the cap.
6. Place a pH7 solution in the storage cap and screw it to the device. Then, press “Validate”. At the top of the screen, you will see the progression of the measurement. Once the pH7 measurement is complete, unscrew the storage cap and rinse the probe. Empty, rinse and wipe the cap.
7. Validate calibration.
8. Place the usage cap and place back Blue Connect in the swimming-pool.

For illustrated instructions, please consult your Owner’s Manual.