Description

Granular Flocculant causes the cloudy water particles to clump together and sink to the bottom of the pool. Once settled it is ready to be vacuumed out of the pool. Make sure to follow the instructions carefully.

AVAILABLE SIZES:

• flexi: 2Kg & 25Kg

ACTIVE CONSTITUENT:

• 1000g/Kg ALUMINIUM SULPHATE

For further information please download our Pool Care Brochure

APPLICATION

Dosage rate: 400gms per 10,000L

Dosage rates indicated are a guide only. Please refer to the label for further instructions.

General Instructions:

1. For best results, raise pH to approximately 8.2.
2. Set the filter to ‘RE-CIRCULATE’. Where the setting is not available, remove filter cartridges before operating filter.
3. Turn the filter on.
4. Dilute the product in a bucket of pool water and apply the solution evenly around the edges of the pool.
5. Operate the filter for 1-2 hours.
6. Turn the filter off for 12-24 hours until sediments settle.
7. Vacuum sediment to waste.
8. Replace filter cartridges if they have been removed.
9. Resume normal filtration.
10. Adjust pH to 7.2-7.6 and ensure chlorine levels are normal.
11. In extreme cases, a second treatment may be necessary.

We recommend that you obtain advice from your Zodiac Pool Professional before adding any treatment to your pool or spa.

SAFETY DATA SHEET