Description

Benefits:

• 1 application every 3 months
• Long lasting
• Ideal winter treatment

AVAILABLE SIZES:

• 1L & 25L

ACTIVE CONSTITUENT:

• 40g/L COPPER (Cu) present as a CUPRIC AMMONIUM COMPLEX

For further information please download our Pool Care Brochure

APPLICATION

Dosage rate: 200mL per 10,000L.

Dosage rate indicated are a guide only. Please refer to the label for further instructions.

General instructions:

1. Brush the affected areas thoroughly.
2. Check the pH level to make sure it is between 7.2 and 7.6.
3. Add sufficient amount of purifier (sanitiser) to eliminate algae.
4. Add algaecide directly into the water and leave overnight with the filter running.
5. It is recommended to add a clarifier to aid in the filtration process of dead algae.
6. Following treatment, brush pool walls thoroughly and remove settled algae by vacuuming.
7. Do not add any product that would raise pH and Total Alkalinity for 72 hours after treatment.

Winter treatment: Use this product during winter in conjunction with an appropriate purifier (sanitiser) to help prevent algae growth.

Note: Copper in water reduces the activity of chlorine and bromine. Copper concentration in the swimming pool must not exceed 1mg/L. Check chlorine and bromine levels after applying this product and adjust if necessary.

SAFETY DATA SHEET